Width [mm]: 30 mm ; Weight [kg]: 0,42 kg ; Inner diameter [mm]: 30 mm ; Outer diameter [mm]: 64,7 mm ; Number of Teeth: 26 ; ArticleState: Normal ; Technical Information: Correa de distribución
Diameter [mm]: 228 mm ; Width [mm]: 40 mm ; Brake System: LOCKHEED ; Weight [kg]: 2,04 kg ; ArticleState: Normal ; General Information: http://www.abs-bv.nl/pdp/9153.html
Manufacturer Restriction: BOSCH ; Wear Warning Contact: not prepared for wear indicator ; Height [mm]: 57,3 mm ; Length [mm]: 137 mm ; Thickness [mm]: 19 mm ; Fitting Position: Front Axle ; ArticleState: Normal
Manufacturer Restriction: ATE ; Wear Warning Contact: not prepared for wear indicator ; Height [mm]: 52,5 mm ; Length [mm]: 151,4 mm ; Thickness [mm]: 17,8 mm ; Fitting Position: Front Axle ; ArticleState: Normal
Width [mm]: 136,8 mm ; Height [mm]: 57,4 mm ; Thickness [mm]: 19,6 mm ; Wear Warning Contact: incl. wear warning contact ; Warning Contact Length [mm]: 198 mm ; Supplementary Article/Supplementary Info: with accessories ; Supplementary Article/Info 2: with brake caliper screws ; Number of screws: 2 ; Brake System: Bosch ; Inspection Tag: E1 90R-011403/1364 ; MAPP code available: ; ArticleState: Normal ; Technical Information: Es ist technisch möglich, ATE Ceramic Bremsbeläge mit der Po
werDisc oder mit gelochten Bremsscheiben zu kombinieren.
Die Bremsleistung bleibt bei dieser Paarung gleich hoch, wie
bei einem ATE Original- oder OE-Bremsbelag.
Das Zusammenspiel der beiden Bauteile kann aber zu einer erh
öhten Geräuschentwicklung beim Bremsvorgang führen.
ATE Ceramic Bremsbeläge sind Beläge, die für den komfortorie
ntierten Fahrer entwickelt wurden.
Grundsätzlich empfehlen wir ATE Ceramic Bremsbeläge daher mi
t normalen , das heißt glatten Bremsscheiben zu kombinieren.
Fitting Position: Front Axle ; Inspection Tag: E1-90 R - 011298/010 ; Thickness [mm]: 19 mm ; Length [mm]: 136,9 mm ; Height [mm]: 57 mm ; ArticleState: Normal
Fitting Position: Front Axle ; Length [mm]: 136,8 mm ; Width [mm]: 57,3 mm ; Thickness [mm]: 18,8 mm ; Brake Lining Backplate Material: Metal ; ArticleState: Normal
Thickness [mm]: 102 mm ; Outer diameter [mm]: 67 mm ; Supplementary Article/Info 2: with seal ; Weight [kg]: 0,12 kg ; ArticleState: Normal ; General Information: Die von uns gelieferten Produkte sind ausschließlich dem
bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf
nur durch geschultes Fachpersonal erfolgen. Produkte werden
in der Regel ohne Montageanleitung geliefert.
Height 1 [mm]: 57,2 mm ; Brake System: Bosch ; Warning Contact Length [mm]: 225 mm ; Width 1 [mm]: 136,8 mm ; Thickness/Strength 1 [mm]: 19 mm ; Number of pads: 4 ; Number of threaded bolts: 2 ; ArticleState: Normal ; Technical Information: Number of Shims: 4
; Technical Information: Number of Wear Leads: 1
Number of Teeth: 190 ; Length [mm]: 1520 mm ; Width [mm]: 24 mm ; ArticleState: Normal ; General Information: http://www.bosch-automotive-catalog.com/pdp/1987949415
Width [mm]: 40 mm ; for article number: H 23 050 ; Diameter [mm]: 228 mm ; Bore Ø [mm]: 20,64 mm ; Brake System: AP Lockheed ; ArticleState: Article to be discontinued
for article number: S 23 518 ; Diameter [mm]: 228,6 mm ; Width [mm]: 42 mm ; Brake System: AP Lockheed ; Supplementary Article/Info 2: with handbrake lever ; ArticleState: Normal
Number of Teeth: 190 ; Width [mm]: 24 mm ; Weight [kg]: 0,238 kg ; Packaging length [cm]: 25,5 cm ; Packaging width [cm]: 16 cm ; Packaging height [cm]: 3 cm ; ArticleState: Normal
Diameter [mm]: 64,8 mm ; Width [mm]: 30 mm ; Tensioner Pulley Actuation: Automatic ; for article number: KD032/KD045 ; ArticleState: only supplied in parts list
Number of wear indicators [per axle]: 1 por eixo ; Number of connectors: 1 ; Wear Warning Contact: prepared for wear indicator ; Thickness [mm]: 19 mm ; Width [mm]: 137 mm ; Height [mm]: 57,4 mm ; Warning Contact Length [mm]: 200 mm ; ArticleState: Normal
for article number: TBK179/TBK180/TBK224 ; for article number: TBK242/TBK245/TBK433 ; for article number: TBK475 ; Diameter [mm]: 65 mm ; Width [mm]: 30 mm ; ArticleState: Normal
Construction year to: 01.2006 ; Fitting Position: Front Axle ; Length [mm]: 136,9 mm ; Height [mm]: 57 mm ; Thickness [mm]: 19 mm ; Wear Warning Contact: excl. wear warning contact ; ArticleState: Normal
Construction year to: 01.2006 ; Fitting Position: Front Axle ; Length [mm]: 137 mm ; Height [mm]: 57,3 mm ; Thickness [mm]: 19 mm ; Wear Warning Contact: with integrated wear sensor ; Number of wear indicators [per axle]: 1 por eixo ; Warning Contact Length [mm]: 210 mm ; ArticleState: Normal
Width [mm]: 30 mm ; Outer diameter [mm]: 65 mm ; Material: Metal ; Number of Teeth: 26 ; Weight [kg]: 0,306 kg ; ArticleState: Normal ; General Information: für Zahnriemen
; General Information: Die von uns gelieferten Produkte sind ausschließlich dem
bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf
nur durch geschultes Fachpersonal erfolgen. Produkte werden
in der Regel ohne Montageanleitung geliefert.
Thickness [mm]: 100,5 mm ; Outer diameter [mm]: 67,5 mm ; Supplementary Article/Info 2: with seal ; Weight [kg]: 0,1 kg ; Filter type: Filter Insert ; ArticleState: Normal ; General Information: Die von uns gelieferten Produkte sind ausschließlich dem
bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf
nur durch geschultes Fachpersonal erfolgen. Produkte werden
in der Regel ohne Montageanleitung geliefert.
Width [mm]: 137 mm ; Fitting Position: Front Axle ; Height [mm]: 57,4 mm ; Thickness [mm]: 19 mm ; Weight [kg]: 1,72 kg ; Wear Warning Contact: incl. wear warning contact ; ArticleState: Normal ; General Information: Die von uns gelieferten Produkte sind ausschließlich dem
bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf
nur durch geschultes Fachpersonal erfolgen. Produkte werden
in der Regel ohne Montageanleitung geliefert.
Width [mm]: 24 mm ; Number of Teeth: 190 ; Weight [kg]: 0,62 kg ; Belts: with trapezoidal tooth profile ; Observe service information: ; ArticleState: Normal ; General Information: Die von uns gelieferten Produkte sind ausschließlich dem
bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf
nur durch geschultes Fachpersonal erfolgen. Produkte werden
in der Regel ohne Montageanleitung geliefert.
Fitting Position: Rear Axle ; Width [mm]: 43 mm ; Drum Diameter: 228.6 ; Brake System: Lockheed ; Quality: 1127F ; Inspection Tag: E1 90R 011147/020 ; Weight [kg]: 2,058 kg ; ArticleState: Normal ; Technical Information: http://www.ferodo.com/de-de/Pages/Home.aspx
SICHER: Kürzerer Bremsweg als viele Wettbewerbern
QUALITÄT: Erfüllt OE-Spezifikationen und übertrifft viele
Normen
EASY : Einfache Einbau auf 99% der Fahrzeuge in Europa
EFFEKTIV: Hervorragendes Anti-Fading und
Nassansprechverhalten
HALTBAR: Längere Lebensdauer und geringerer
Bremsscheibenverschleiß
GERÄUSCHARM: Geräuschmindernde Eigenschaften fördern den
Fahrkomfort
Über 100 Jahre Erfahrung auf dem Gebiet Reibung und Bremsen
bedeuten, dass der Name Ferodo gleichbedeutend mit
Spitzenleistung ist. Ferodo war weltweit die erste Marke,
die sich ausschließlich mit der Konstruktion und Herstellung
von Reibmitteln beschäftigt. Und heute entwickeln unsere
erfahrenen Ingenieure richtungsweisende Lösungen sogar für
schwierigste Bedingungen.
Fitting Position: Front Axle ; Thickness [mm]: 18,4 mm ; Length [mm]: 137 mm ; Supplementary Article/Info 2: with brake caliper screws ; Width [mm]: 57,3 mm ; WVA Number: 23708 ; WVA Number: 23709 ; Brake System: Bosch ; Number of wear indicators [per axle]: 2 por eixo ; Inspection Tag: R90 Homologated ; Wear Warning Contact: incl. wear warning contact ; Weight [kg]: 1,4 kg ; ArticleState: Normal ; Technical Information: Technical Information:https://goo.gl/AkxzEj
; Brief Information: http://ecofriction.com
; Technical Information: http://www.ferodo.com/de-de/Pages/Home.aspx
SICHER: Kürzerer Bremsweg als viele Wettbewerbern
QUALITÄT: Erfüllt OE-Spezifikationen und übertrifft viele
Normen
EASY : Einfache Einbau auf 99% der Fahrzeuge in Europa
EFFEKTIV: Hervorragendes Anti-Fading und
Nassansprechverhalten
HALTBAR: Längere Lebensdauer und geringerer
Bremsscheibenverschleiß
GERÄUSCHARM: Geräuschmindernde Eigenschaften fördern den
Fahrkomfort
Über 100 Jahre Erfahrung auf dem Gebiet Reibung und Bremsen
bedeuten, dass der Name Ferodo gleichbedeutend mit
Spitzenleistung ist. Ferodo war weltweit die erste Marke,
die sich ausschließlich mit der Konstruktion und Herstellung
von Reibmitteln beschäftigt. Und heute entwickeln unsere
erfahrenen Ingenieure richtungsweisende Lösungen sogar für
schwierigste Bedingungen.
Fitting Position: Front Axle ; Length 1 [mm]: 137 mm ; Thickness/Strength 1 [mm]: 19,2 mm ; Weight [kg]: 2 kg ; Width 1 [mm]: 57,4 mm ; Specification: DSUNO ; Specification: Racing use only ; ArticleState: Normal
Fitting Position: Front Axle ; Length 1 [mm]: 137 mm ; Thickness/Strength 1 [mm]: 19,2 mm ; Weight [kg]: 2 kg ; Width 1 [mm]: 57,4 mm ; Specification: DS2500 ; Specification: Track day use ; ArticleState: Normal
Fitting Position: Front Axle ; Length 1 [mm]: 137 mm ; Thickness/Strength 1 [mm]: 19,2 mm ; Weight [kg]: 2 kg ; Width 1 [mm]: 57,4 mm ; Specification: DS3000 ; Specification: Racing use only ; ArticleState: Normal
Width [mm]: 137 mm ; Height [mm]: 57 mm ; Thickness [mm]: 19 mm ; Fitting Position: Front Axle ; Wear Warning Contact: not prepared for wear indicator ; ArticleState: Normal
Diameter [mm]: 64,8 mm ; Width [mm]: 30 mm ; Tensioner Pulley Actuation: Automatic ; for article number: KD032/KD045 ; ArticleState: only supplied in parts list
Diameter [mm]: 228,6 mm ; Width [mm]: 42 mm ; Supplementary Article/Info 2: with handbrake lever ; Technical Information Number: H9690 ; ArticleState: Normal
Diameter [mm]: 228,6 mm ; Width [mm]: 42 mm ; Supplementary Article/Info 2: with handbrake lever ; Technical Information Number: H9690 ; ArticleState: Normal
Thickness [mm]: 19 mm ; Width [mm]: 137 mm ; Weight [kg]: 1,85 kg ; Height 1 [mm]: 57,5 mm ; ArticleState: Normal ; Technical Information: Contents: Contents: 1 pads with wear lead 200mm, 3 pads
without
Diameter [mm]: 228 mm ; Supplementary Article/Supplementary Info: with lever ; Width [mm]: 42 mm ; Fitting Position: Rear Axle ; Brake Pad: with lining ; ArticleState: Normal
Diameter [mm]: 228 mm ; Width [mm]: 40 mm ; for article number: 08590 ; Brake System: AP LOCKHEED ; Supplementary Article/Info 2: with handbrake lever ; ArticleState: Normal
Construction year to: 07.2008 ; Fitting Position: Front Axle ; Height 1 [mm]: 57,2 mm ; Brake System: Bosch ; Warning Contact Length [mm]: 225 mm ; Width 1 [mm]: 136,8 mm ; Thickness/Strength 1 [mm]: 19 mm ; Number of pads: 4 ; Number of threaded bolts: 2 ; ArticleState: Normal ; Technical Information: Number of Shims: 4
; Technical Information: Number of Wear Leads: 1
Width [mm]: 136,8 mm ; Brake System: BOSCH ; for article number: 05P764K ; Height [mm]: 57,4 mm ; Thickness [mm]: 18,4 mm ; Warning Contact Length [mm]: 205 mm ; Number of wear indicators [per axle]: 1 por eixo ; ArticleState: Normal
Diameter [mm]: 228 mm ; Width [mm]: 40 mm ; for article number: 08590 ; Brake System: AP LOCKHEED ; Supplementary Article/Info 2: with handbrake lever ; ArticleState: Normal
Thickness [mm]: 18,4 mm ; Width [mm]: 136,8 mm ; Height [mm]: 57,4 mm ; Number of wear indicators [per axle]: 1 por eixo ; for article number: 05P764 ; Brake System: BOSCH ; Warning Contact Length [mm]: 205 mm ; ArticleState: Normal
Width [mm]: 24 mm ; Number of Teeth: 190 ; Driven Units: Driven unit: camshaft ; Driven Units: Driven unit: water pump ; ArticleState: Article to be discontinued
for article number: 1050068 ; Thickness [mm]: 19 mm ; Width [mm]: 137 mm ; Height [mm]: 57,4 mm ; Number of wear indicators [per axle]: 1 por eixo ; Wear Warning Contact: prepared for wear indicator ; Number of connectors: 1 ; Warning Contact Length [mm]: 200 mm ; ArticleState: Normal
Outer diameter [mm]: 67 mm ; Inner diameter [mm]: 25 mm ; Height [mm]: 99 mm ; Supplementary Article/Supplementary Info: with seal ; ArticleState: Normal
Fitting Position: Rear Axle ; Width [mm]: 42 mm ; Diameter [mm]: 228,6 mm ; Brake System: Lockheed ; Part number of recommended accessories: 105-0682 ; Part number of recommended accessories: 105-0862 ; ArticleState: Normal
Fitting Position: Front Axle ; Length [mm]: 136,8 mm ; Height [mm]: 57,2 mm ; Thickness [mm]: 18,5 mm ; Wear Warning Contact: with integrated wear sensor ; Brake System: Bosch ; Specification: ECE R90 APPROVED ; Supplementary Article/Info 2: with brake caliper screws ; Part number of recommended accessories: 109-1218 ; Part number of recommended accessories: 109-1298 ; ArticleState: Normal
Fitting Position: Rear Axle ; Diameter [mm]: 228 mm ; Width [mm]: 42 mm ; Supplementary Article/Supplementary Info: without spring ; Supplementary Article/Supplementary Info: with lever ; ArticleState: Normal
Fitting Position: Front Axle ; Width [mm]: 136,8 mm ; Height [mm]: 57,4 mm ; Thickness [mm]: 19,6 mm ; Number of wear indicators [per axle]: 1 por eixo ; Wear Warning Contact: incl. wear warning contact ; Brake System: Bosch ; Supplementary Article/Info 2: with anti-squeak plate ; Quality: PREMIUM ; ArticleState: Normal ; General Information: Bremsbeläge mit kurzer Einbremszeit und Vermeidung von
Fading durch Scorching-Technologie. Optimale Belagsmischung
sorgt für sicheres Bremsverhalten.
Supplementary Article/Supplementary Info: with seal ; Filter type: Filter Insert ; Height [mm]: 100,5 mm ; Outer diameter [mm]: 68 mm ; Diameter 1 [mm]: 24,5 mm ; ArticleState: Normal
Diameter [mm]: 228,6 mm ; Width [mm]: 42 mm ; Supplementary Article/Info 2: with handbrake lever ; Weight [kg]: 1,932 kg ; Packaging length [cm]: 21,5 cm ; Packaging width [cm]: 18,7 cm ; Packaging height [cm]: 9,7 cm ; ArticleState: Normal
Number of wear indicators [per axle]: 1 por eixo ; Number of connectors: 1 ; Wear Warning Contact: prepared for wear indicator ; Thickness [mm]: 19 mm ; Width [mm]: 137 mm ; Height [mm]: 57,4 mm ; Warning Contact Length [mm]: 200 mm ; ArticleState: Normal
Number of Teeth: 190 ; Width [mm]: 24 mm ; Heat resistant: ; Packaging length [cm]: 20,8 cm ; Packaging width [cm]: 3,2 cm ; Packaging height [cm]: 23 cm ; ArticleState: Normal
Pulleys contained: 2 ; Number of belts: 1 ; Packaging length [cm]: 26,1 cm ; Packaging width [cm]: 15,4 cm ; Packaging height [cm]: 9,4 cm ; ArticleState: Normal
Width [mm]: 24 mm ; Number of Teeth: 190 ; Driven Units: Driven unit: camshaft ; Supplementary Article/Supplementary Info: with accessories ; ArticleState: Normal
Fitting Position: Front Axle ; Thickness [mm]: 18,4 mm ; Length [mm]: 137 mm ; Height [mm]: 57,3 mm ; Number of wear indicators [per axle]: 1 por eixo ; Wear Warning Contact: with integrated wear sensor ; Brake System: Bosch ; ArticleState: Normal
Fitting Position: Front Axle ; Thickness [mm]: 18,4 mm ; Length [mm]: 137 mm ; Height [mm]: 57,3 mm ; Number of wear indicators [per axle]: 1 por eixo ; Wear Warning Contact: with integrated wear sensor ; Brake System: Bosch ; ArticleState: Normal
Length [mm]: 137 mm ; Width [mm]: 19 mm ; Height [mm]: 57,4 mm ; Wear Warning Contact: incl. wear warning contact ; Number of wear indicators [per axle]: 1 por eixo ; Warning Contact Length [mm]: 215 mm ; ArticleState: Article to be discontinued
Width [mm]: 136,8 mm ; Height [mm]: 56 mm ; Thickness [mm]: 19 mm ; Wear Warning Contact: excl. wear warning contact ; Supplementary Article/Info 2: with brake caliper screws ; See accessories list for additionally required parts: ; ArticleState: Article to be discontinued
Engine Code: 188B2.000 ; Driven Units: Driven unit: camshaft ; Number of Teeth: 190 ; Width [mm]: 24 mm ; Driven Units: excl. water pump ; Supplementary Article/Info 2: with belt ; ArticleState: Normal
Number of Teeth: 190 ; Width [mm]: 24 mm ; Supplementary Article/Supplementary Info: with add-on material ; Supplementary Article/Info 2: with screw ; Bolt / Nut Version: with plain washer ; ArticleState: No longer supplied by manufacturer
Number of wear indicators [per axle]: 1 por eixo ; Number of connectors: 1 ; Wear Warning Contact: prepared for wear indicator ; Thickness [mm]: 19 mm ; Width [mm]: 137 mm ; Height [mm]: 57,4 mm ; Warning Contact Length [mm]: 200 mm ; ArticleState: Normal
Number of Teeth: 190 ; Width [mm]: 24 mm ; Belts: with rounded tooth profile ; ArticleState: Normal ; General Information: SKF-Empfehlung: Spannrollensatz
Number of Teeth 1: 190 ; Number of belts: 1 ; Weight [g]: 934 g ; Width 1 [mm]: 24 mm ; ArticleState: Normal ; Technical Information: Anzahl der Spannrollen:2
Width [mm]: 24 mm ; Number of Teeth: 190 ; Weight [kg]: 0,62 kg ; Belts: with trapezoidal tooth profile ; Observe service information: ; ArticleState: Normal ; General Information: Die von uns gelieferten Produkte sind ausschließlich dem
bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf
nur durch geschultes Fachpersonal erfolgen. Produkte werden
in der Regel ohne Montageanleitung geliefert.
Width [mm]: 30 mm ; Outer diameter [mm]: 65 mm ; Material: Metal ; Number of Teeth: 26 ; Weight [kg]: 0,306 kg ; ArticleState: Normal ; General Information: für Zahnriemen
; General Information: Die von uns gelieferten Produkte sind ausschließlich dem
bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf
nur durch geschultes Fachpersonal erfolgen. Produkte werden
in der Regel ohne Montageanleitung geliefert.
Thickness [mm]: 80 mm ; Outer diameter [mm]: 65 mm ; Supplementary Article/Info 2: with seal ; Weight [kg]: 0,1 kg ; Filter type: Filter Insert ; ArticleState: Normal ; General Information: Die von uns gelieferten Produkte sind ausschließlich dem
bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf
nur durch geschultes Fachpersonal erfolgen. Produkte werden
in der Regel ohne Montageanleitung geliefert.
Width [mm]: 137 mm ; Fitting Position: Front Axle ; Height [mm]: 57,4 mm ; Thickness [mm]: 19 mm ; Weight [kg]: 1,72 kg ; Wear Warning Contact: incl. wear warning contact ; ArticleState: Normal ; General Information: Die von uns gelieferten Produkte sind ausschließlich dem
bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf
nur durch geschultes Fachpersonal erfolgen. Produkte werden
in der Regel ohne Montageanleitung geliefert.
Fitting Position: Rear Axle ; Diameter [mm]: 228,6 mm ; for article number: 629.0873 ; Width [mm]: 42 mm ; Brake System: AP Lockheed ; Supplementary Article/Info 2: with handbrake lever ; ArticleState: Normal
Warning Contact Length [mm]: 205 mm ; Thickness [mm]: 18,4 mm ; Width [mm]: 136,8 mm ; Height [mm]: 57,4 mm ; Number of wear indicators [per axle]: 1 por eixo ; for article number: 626.0764 ; Brake System: BOSCH ; ArticleState: Normal
Manufacturer Restriction: BOSCH ; Thickness [mm]: 18,6 mm ; Length [mm]: 136,8 mm ; Height [mm]: 57,2 mm ; Wear Warning Contact: not prepared for wear indicator ; ArticleState: Normal
Manufacturer Restriction: BENDIX ; Diameter [mm]: 228 mm ; Width [mm]: 42 mm ; Supplementary Article/Supplementary Info: with lever ; ArticleState: Normal
Manufacturer Restriction: BOSCH ; Thickness [mm]: 18,5 mm ; Length [mm]: 136,8 mm ; Height [mm]: 57,2 mm ; Wear Warning Contact: not prepared for wear indicator ; ArticleState: No longer supplied by manufacturer
Number of Teeth: 26 ; Width [mm]: 30 mm ; Weight [kg]: 0,306 kg ; Required quantity: 1 ; Material: Metal ; Outer diameter [mm]: 65 mm ; ArticleState: Normal ; General Information: Swag 70030029
Number of Teeth: 190 ; Width [mm]: 24 mm ; Weight [kg]: 0,238 kg ; Packaging length [cm]: 25,5 cm ; Packaging width [cm]: 16 cm ; Packaging height [cm]: 3 cm ; ArticleState: Normal ; General Information: Contitech CT968
Number of Teeth: 190 ; Width [mm]: 24 mm ; Weight [kg]: 0,62 kg ; Required quantity: 1 ; Belts: with trapezoidal tooth profile ; ArticleState: Normal ; General Information: Swag 70923655
Number of Teeth: 26 ; Width [mm]: 30 mm ; Outer diameter [mm]: 64,7 mm ; ArticleState: Article to be discontinued ; General Information: Ina/luk 531 0255 30
Number of Teeth: 190 ; Width [mm]: 24 mm ; Weight [kg]: 0,801 kg ; Packaging length [cm]: 26,5 cm ; Packaging width [cm]: 16,5 cm ; Packaging height [cm]: 9,5 cm ; ArticleState: Normal ; General Information: Contitech CT968K2